WTB Ducati Bevel Twin Intake Manifolds ( 40 mm Carbs )

[Lou Zeman]

Good Day:

I am looking for a set of intake manifolds for a race bike project. I believe early 900SS ( 1975 to ? ), prior to when they curved the rear one to clear the battery, are the ones I need. From what I remember the rear manifold came pretty much straight out with a slight upwards kink. Carbs are 40 mm spigot mount with 58mm bolt spacing. Any information would be appreciated. Thank you for your time.

Regards

[ducati588]

In the past I purchased the manifold's your are looking from Syd's Cycle in Florida. Syd and Malcom (son) are fax and phone only I am afraid.

You can also try Bevelheaven, they may have what you are looking for.

Vendor 'motocorseducati' has these cool red anodised ones on eBay.

Those are the places I would start with.

Good Luck.

Rob

[The Goochman]

You can also try Road and Race in Australia. Phil Hitchcock is one of the good ones.

Dave G

[Lou Zeman]

Thank you for your help and for the contacts.