M900 Problems with Shifting
3 posts
• Page 1 of 1
M900 Problems with Shifting
I have a 96 Monster 900. Recently it has been getting more difficult to shift into 1st and it will regularly slip out of 1st when I am riding and back into neutral. Doesn't seem to do that in other gears. I am not mechanical so I wouldn't attempt the repairs myself but wondering what might be the problem. Any ideas?
- alpharep
- Posts: 3
- Joined: Thu Oct 30, 2008 1:21 am
Re: M900 Problems with Shifting
On the back side of the engine there is a large nut located opposite side of the chain. If this has backed off it could be causing your problem. Just tighten this up and see how it feels. If this isn't your problem you may have something wrong with the selector fork inside the left engine cover. Sometimes a tine breaks off, or it is out of adjustment. These selector fork assemblies can be had on eBay of not much cash - no idea what a dealer would charge.
Good luck.
Rob
Good luck.
Rob
Rob Marshall - '95 Ducati 900SS
- '85 Cagiva 650 Allazurra
- '85 Cagiva 650 Allazurra
- ducati588
- Posts: 74
- Joined: Tue Dec 20, 2005 11:32 am
- Location: Richmond, Ontario
Re: M900 Problems with Shifting
Thanks Rob! I will look into that. I am hoping it is something simple and inexpensive. We recently moved to BC and I've discovered that the local bike mechanics won't touch a Duc. I have to take it to Kelowna - about 1 1/4 hrs away for the nearest Ducati dealer.
- alpharep
- Posts: 3
- Joined: Thu Oct 30, 2008 1:21 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests