Page 1 of 1
Frame sliders torque
Posted: Fri Mar 28, 2008 4:12 pmCould somebody tell me what torque should I use installing frame sliders on my 07 S4R ? 
Torque
Posted: Sat Mar 29, 2008 11:39 amJoe what size are the bolts? I can give you a standard torque spec for size, would also like to know the thread pitch.
Posted: Sat Mar 29, 2008 11:40 amHmmm...I am not familiar with monsters but are these replacing the motor mount bolt to the frame ?
If they are....I would not recommend any other torque than the OEM motor mount bolt torque speced in the shop manual. For 748/996/998 superbikes it is 45 ft/lbs or 60 N.M. I am not sure if it is the same for monsters.
If they are....I would not recommend any other torque than the OEM motor mount bolt torque speced in the shop manual. For 748/996/998 superbikes it is 45 ft/lbs or 60 N.M. I am not sure if it is the same for monsters.
Posted: Sun Mar 30, 2008 9:49 amPosted: Wed Apr 02, 2008 4:44 pmWas that spec "snug it up to where you think it should be, then add 10ftlbs", or do that, then subtract 10ftlbs?
