Ducati Owners Club Of Canada

Any Thoughts on Fast by Ferracci ?

Discuss maintenance and modification of modern Ducatis'.
11 posts • Page 1 of 1

Any Thoughts on Fast by Ferracci ?

Postby Bigphil » Wed Sep 17, 2008 4:45 pm

Bigphil
 
Posts: 15
Joined: Tue Nov 20, 2007 11:32 am
Location: Toronto

Re: Any Thoughts on Fast by Ferracci ?

Postby Markus » Wed Sep 17, 2008 6:00 pm

Last edited by Markus on Wed Sep 17, 2008 8:44 pm, edited 1 time in total.
2000 M966Sie
2007 ST3s ABS
User avatar
Markus
 
Posts: 159
Joined: Thu Dec 23, 2004 4:33 pm
Location: Nova Scotia

Postby Zuben » Wed Sep 17, 2008 8:12 pm

User avatar
Zuben
 
Posts: 10
Joined: Thu Dec 16, 2004 12:38 am
Location: Ajax, Ontario

Postby Rory » Thu Sep 18, 2008 6:40 am

A succession of Desmos, complemented by a cage or two of the Stuttgart variety....
User avatar
Rory
 
Posts: 78
Joined: Wed Jan 09, 2008 9:58 pm
Location: Halifax, NS

Postby ERIC SUMMERS » Thu Sep 18, 2008 11:08 am

User avatar
ERIC SUMMERS
 
Posts: 270
Joined: Wed Mar 02, 2005 10:48 am
Location: Over the hill and far away.

Postby Bigphil » Thu Sep 18, 2008 7:13 pm

Thanks all,

I have looked at ebay euro motard, They have pipes for the 600/700/900. Can any of these work on the 800 ?

I have also contacted Hindle for places to buy (ANY IDEAS ?)

The Remus route and the UK web are on the list for tonight !!

bigphil
Bigphil
 
Posts: 15
Joined: Tue Nov 20, 2007 11:32 am
Location: Toronto

FBF, Hindle aftermarket exhausts

Postby Bigphil » Fri Sep 19, 2008 11:12 am

More questions !!!

Have spoken with my local Ducati dealer. Acknowledging now that Termignoni do not manufacture the low/standard slip on any more, he cited that if I change to Hindle or FRF I will need a new ECU, which Ducati do not manufacture either.

Spoke with FBF, they state that the standard ECU will work with their product

Who is right or wrong !?!?!?

Also, would a pipe designed for the 750 or 900ss work ?

Thanks again
Bigphil
 
Posts: 15
Joined: Tue Nov 20, 2007 11:32 am
Location: Toronto

Postby Markus » Fri Sep 19, 2008 11:30 am

Hmm... your Ducati dealer's recommendation sounds suspicious to me.

If you only change out the stock exhaust cans for aftermarket slipon cans you ought to be fine. However, if you also change the headers and/or open the airbox and add a freer flowing air filter you'll need to adjust the factory ECU and/or add a Powercommander. My fuel injected Monster ran perfectly fine when I installed slipon pipes but left the restrictive sotck airbox cover and factory air filter in place. However, when I removed the airbox cover and installed a K&N air filter the bike immediately began to very lean and I needed to install a Power Commander 3 and have a custom map made for it.

Similarly with my ST3 - I ran that bike for a couple of months with the DP pipes but left the stock air filter and air box cover in place. It ran fine. Once I had an opportunity to take the bike into the dealer for a proper service they did the ECU/airbox/air filter swap all at the same time.

My experience has been that, unless you adjust the flow of air into the motor or out of the motor (ie intake and/or header + exhaust mods) the bike will run essentially the same. Slipons are really just for sound and won't give any performance gains (excepting the bassier/louder sound which some might argue is a performance mod :wink: ).

And keep in mind the Ferracci guys have been building extremely fast Ducati race bikes for decades so I'd tend to believe them when they say you won't need a new ECU if you're just installing their pipes.

Sorry, I don't know whether a 750 or 900 pipe will work.
2000 M966Sie
2007 ST3s ABS
User avatar
Markus
 
Posts: 159
Joined: Thu Dec 23, 2004 4:33 pm
Location: Nova Scotia

Even more questions

Postby Bigphil » Fri Sep 19, 2008 11:45 am

Thanks Markus and all for your thougts & recommendations.

I have also located a set of Barracuda carbon fibre slip ons, which can be on my bike at the end of next week at close to a third less cost !!!!.

I have heard of Barracuda before from friends in the 'in-line four" gang, but fitted on a Ducati ????

Again, thoughts and recommendations please

Bigphil
Bigphil
 
Posts: 15
Joined: Tue Nov 20, 2007 11:32 am
Location: Toronto

last question I promise

Postby Bigphil » Fri Sep 19, 2008 5:08 pm

Any thoughts on Barracuda pipes ?
Bigphil
 
Posts: 15
Joined: Tue Nov 20, 2007 11:32 am
Location: Toronto

Re: last question I promise

Postby Markus » Fri Sep 19, 2008 7:41 pm

2000 M966Sie
2007 ST3s ABS
User avatar
Markus
 
Posts: 159
Joined: Thu Dec 23, 2004 4:33 pm
Location: Nova Scotia


11 posts • Page 1 of 1

Return to modern ducati tech

Who is online

Users browsing this forum: No registered users and 11 guests

Powered by phpBB® Forum Software © phpBB Group Change colors.

Style designed by Artodia.